Address : Unit 4/500 Clayton Rd, Clayton South VIC 3168, Phone : 03 9558 9553, Fax : 03 9558 9556
Fabulous Functionality and Endless Elegance
Australia Flag English Korea Flag Korean
Facebook logo Twitter logo


Lithofin KF Cement Residue Remover dissolves an

organic deposits such as cement and mortar residues,

efflorescence, rust and calcium deposits. The dirt can

then be completely removed from the surface.

Field of use

Due to its mild odour, Lithofin KF Cement Residue

Remover is particularly suitable for indoor use. For

cleaning all ceramic surfaces, which need to be

cleaned after laying and grouting. The original

appearance of the surface is restored. Removing even

hardly visible residues is a prerequisite for

unproblematic maintenance.

Surfaces: Suitable for all acid resistant ceramic wall

and floor tiles, quarry tiles, porcelain, clay and brick as

well as terracotta surfaces.

Directions for use

Dilute Lithofin KF Cement Residue Remover approx.

1:5 to 1:15 with water depending on the stubbornness

of the deposits. Wet the surface with clear water and

apply the solution spreading with a brush or scrubber.

Brushing the surface will assist with removing the

deposits. After several minutes, remove the solution

from the surface with a wiping cloth or a wet and dry

vac. Rinse well with clear water. In case of stubborn

deposits, repeat this procedure with a lower degree of

dilution or undiluted.

Please note: Always test this product in an

inconspicuous area prior to use. Acid sensitive

surface such as enamel, zinc, marble, limestone,

certain decorative tiles, wood, etc. must be protected

against splashes.

Coverage: Approx. 12 to 30m